WTB/T: Divider for a 55 Long

jonclark96

jonclark96

Past CCA President
I typically use the lighting egg crate diffuser you can purchase from Home Depot or Lowes. Just cut it to size to fit the tank. If you are trying to separate small fish, you may find it difficult to get a good divider to "seal" off the edges at the tank. I posted a thread where I siliconed some angles to the glass to provide a positive anchor for the egg crate.

I used the commercially available dividers with limited success. I found that they worked well for larger fish, but small fish were able to slip by the edges of the divider.
 
madcobra216

madcobra216

Members
Sounds like a good idea, not sure if the squares will be small enough to keep juvis contained. But I'll check it out.

Sent from my SGH-M919 using MonsterAquariaNetwork App
 
A

Ading522

Members
I used egg crate too and covered it with sunscreen net held together by zip ties.. No fry has been through the other side so far..

Sent from my XT1060 using MonsterAquariaNetwork App

uploadfromtaptalk1390840129780.jpg

uploadfromtaptalk1390840169967.jpg
 
madcobra216

madcobra216

Members
Let me just say that, Aldrich's suggestion of the homemade Aquarium Divider is probably 1 of the best do it yourself ideas I've implemented in a long time. Great idea bro, thanks

Sent from my SGH-M919 using MonsterAquariaNetwork App
 
A

Ading522

Members
madcobra216 said:
Let me just say that, Aldrich's suggestion of the homemade Aquarium Divider is probably 1 of the best do it yourself ideas I've implemented in a long time. Great idea bro, thanks

Sent from my SGH-M919 using MonsterAquariaNetwork App
Click to expand...

Glad it worked for you man!

Sent from my Xoom using MonsterAquariaNetwork App
 
You must log in or register to reply here.
Top