I decided to build a wood stand and really don't need this one. It is pretty big, and designed for at least a 180 footprint (6 x 2). However the exterior dimensions are 72 inches long (6ft) x 31 3/8 inches wide x 24 inches tall. The entire stand is actually a sump with 6 seperate compartments that measure 11 1/2 inches wide x 30 inches (front to back) x 24 inches high. Each compartment has small holes at the bottom to allow water to pass through, plus additional holes are plumbed throughout to plumb it however you want. There is also a couple acrylic "lips" for lack of a better term that stick out in each compartment that look like you could use to insert trays for media. There is nothing included other than the stand and a small cover (see pic) that sits on top of the stand to take up the additional 6 inches or so left over after you place the tank on it. It also serves as your access point for the sump. There is a pretty good chip out of the "cover" but I might have it, I will have to look.This thing could be used seperate as a compartmentalized tank system or as a stand/sump. The sides and front are white, back is clear. Overall nice shape but could use cleaning. Appears to hold water fine but could only test the lower part of the stand. Asking $500, but willing to talk. Also would consider partial trade for Texas Holey Rock (nice pieces), and Aragamax Select (Argonite by Caribsea). Thanks-
