diy

I have tried everything to get my GT to eat something that isn't a nightcrawler so I decided to try and make a fish food that looks like an earthworm to feed him and this is what I did. Step 1 was to gather all the foods I intended to include in the recipe. I used the following foods and went...

I just wanted to do a write up to help anyone who needs a strong and high quality tank stand. This stand is vastly more sturdy costs a fraction of the store bought stands. I used the KingofDIY's basic instructions for framing the stand and wrapped it in a way that's simple and tasteful. I am by...

I've recently been having issues with the motors and shafts/impellers on my some of my ACs getting clogged with PFS and suddenly shutting down. I wind up having to take the motor housing off, pull the impeller off the shaft (or pulling the shaft out as well) and taking a toothbrush and cleaning...

Anyone ever done a diy fish trap? Due to delays in manufacture my new tanks will get here long after I have to move, so instead of removing all the plants to replant I'll have to move the fish first and, well, ****.

At the holiday party, Christine showed me some DIY LED lighting that she was using for her racks. Hopefully she'll see this thread and post up the details. I'm interested in learning more!

I am putting together a little tank. Probobly a 17 or 24 gallon rimless planted shrimp tank. I have 4 Deep Blue Micro LEDs, and a Current Single Ramp Timer. I already confirmed with Deep Blue it is compatable at 12v. My questions are. Should I use a spitter or a daisy chain? Would a PSU like...

I have a bunch of Hydro sponge filters, and I'm missing uplift tubes for some of them. Anyone know a good DIY solution to make more? I'm assuming its just a matter of finding the right diameter rigid tubing, but wanted to ask if anyone had found something.

so yesterday i drove up to Discus Hans to get my first Discus and i ended up getting 4 of them. While i was there he was making his own food that he feeds to his fish and was telling me about it. so when i got home i decided to try it for my self and made a small batch. its probably not exactly...

Well I made the DIY sliding glass covers for my 75 gallon. I have seen these on many forums. I added my own little touch. Instead of buying a glass canopy handle from marine land or the like I framed out the glass which was very sharp to begin with, with plastic tile moulding. The front piece I...

Hey guys, just finished building an overhead trickle filter and figured I'd share for feedback. Anyone else here running overhead filters? Here's a crappy Iphone video https://vid.me/pTe3 Plumbing: 1" Bulkhead on the intake and a 2" on the drain. The pvc in the filter has 70-80 holes...

has anyone ever made a canister filter before, they do nit seem to hard to build and i enjoy projects like this but is it worth making my own? and if any one has made one what container did you use ad the canister body? i think a 5 gallon bucket would work but i can not find any videos or any...

Here it is the start of my first diy horizontal canister filter. Once I get these measured out a dry fitted I will finish getting measurements for the rest of the pipe. Then the second stage will begin. Sent from my SCH-I200PP using MonsterAquariaNetwork App

Ive been watching alot of videos on youtube of people building canister filters. Does anyone have experience with this and how well do they work? Sent from my SCH-I200PP using MonsterAquariaNetwork App

Has anyone tried using DIY LED tape/strips in their fish room? I was wondering how hard it is to install something like this - http://amzn.com/B00B2F3KDQ - along the bottoms of racks so that they shine into the tanks below? Is this as easy as it looks or am I in for a load of trouble?

So I was noticing my sump was missing some of the "finer" debris in my 125. I am on vacation this week so I decided to spend some time messing around with a way to improve it..... Mag 18 pump to a 4" sch 40 PVC pipe.. Filled with course medium and finer filter media ... Down to a tee fro the out...

I have my 7th year wedding anniversary on Tuesday and decided to do a little DIY metal art as the gift. It hangs up one the wall... Just felt like sharing ... I hope she likes it Sent from my iPhone using MonsterAquariaNetwork app

I'm trying to plan out my fishroom and determine what type/size racks to use. I had planned on building racks using 2x4's and plywood, but this would take some cooperation because I don't have the needed tools. Are there advantages to wood shelving with plywood over metal shelves with particle...

As some of you know I'm in the process of re-building the Restazonia fish room. I'm nearly done with the assembly of a 13' 39 tank 570 gallon rack. I plan on renting a glass drill from JEHMCO. I will have it for seven days. WIll obviously have it over a weekend - either this or the next. If...

Hey so going to make some small bio filters from leftover water bottles and wanted to know what would be the best bio media to use that isn't so expensive. I will incorporate sponges in the filters. I'm making 10 filters in total from 8oz water bottles. Thanks in advice Sent from my iPhone...

I am looking for some ideas for an above ground DIY pond. Has anyone made one? Any ideas / suggestions? Needs to be aesthetically please to get the wife on board Sent from my iPhone using MonsterAquariaNetwork app